Danby DER2099W Instruções de Operação descarregar pdf (Página 37)

TYPICAL CABINET INSTALLATION

• Location – Check location where the range will be installed. Check for proper electrical and gas supply, and the stability of

the floor.

• Dimensions that are shown must be used. Given dimensions provide minimum clearance. Contact surface must be solid

and level.

Follow all dimension requirements provided bellow to prevent property damage, potential fire hazard, and incorrect

countertop and cabinet cuts.

• Make sure the cabinets and wall covering around the range can withstand temperatures (up to 200°F) generated by

the range.

• 30” minimum clearance between cooking surface and bottom of unprotected wood or metal cabinet

• 24” minimum clearance when bottom of wood or metal cabinet is protected by not less than ¼” flame retardant

millboard covered with not less than No. 28 MSG sheet steel, 0.015” stainless steel, 0.024” aluminum or 0.020” copper

• 18” minimum clearance upper cabinet to countertop.

• To reduce the risk of burns or fire when reaching over hot surface elements, cabinet storage space above the cook-top

should be avoided. If cabinet storage space is to be provided above the cook-top, the risk can be reduced by installing

a range hood that sticks out at least 5” beyond the front of the cabinets. Cabinets installed above a cook-top must be

no deeper than 13”.

• 1” minimum to wall on either side of range above 36” height.

Provide Proper Fuel Type

Before Proceeding: Your range is preset to operate on natural gas only. All models are shipped with convertible with parts

and conversion instructions.

CAUTION: DO NOT attempt to convert this range to LP/Propane settings without the proper LP/Propane conversion kit

provided with the range. Follow all instructions provided with the conversion kit.

Important Notes:

TO INSTALLER:

• Read all instructions contained in these installation instructions before installing range.

• Remove all packing material from the oven compartments before connecting the gas and electrical supply to the range.

• Observe all governing codes and ordinances.

• Leave installation instructions with homeowner.

• Proper installation is the responsibility of the installer.

TO HOMEOWNER:

• Keep installation instructions for future reference.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 46 47

Sem comentários

Danby DER2099W Instruções de Operação Página 37